Ce trebuie sa stim despre CBCT (tomografia computerizata cu fascicul conic)?

1. Ce este CBCT?

In traducere libera, CBCT - Cone Beam Computer Tomography - inseamna tomografie computerizata cu fascicul conic. Aceasta tehnologie a aparut in anul 2001 si a insemnat un salt imens în imagistica medicala, imbunatatind atat diagnosticarea, cat si planificarea tratamentului stomatologic, oferind maximum de informatii cu o doza minima de radiatie. Este o investigatie foarte simpla, ce nu necesita o pregatire speciala in prealabil, se desfasoara rapid, in cateva secunde, este accesibila ca pret si usor de utilizat.

2. Cum se realizeaza imaginea si analiza 3D?

Aparatul tomografului CBCT arata exact ca un aparat pentru radiografii panoramice, efectuarea tomografiei devenind astfel mult mai comoda decat in cazul tomografelor volumetrice traditionale, cu fascicul in evantai.

CBCT foloseste un singur fascicul mic de raze, acesta avand forma conica si o arie de interes precis, aleasa de operator in functie de recomandarea medicului stomatolog (scanarea unui grup de dinti, a unei hemiarcade sau arcade, a intregii danturi). Scannerul are nevoie de doar cateva secunde si de o singura rotatie in jurul capului pacientului pentru a obtine o imagine 3D foarte buna, din punct de vedere calitativ. Utilizarea fasciculul conic, delimitarea ariei de interes si timpul scurt de iradiere efectiva a pacientului fac ca doza de radiatii in cazul tehnologiei CBCT sa fie de 10 - 20 de ori mai mica decat cea utilizata in cazul tomografiilor volumetrice (clasice) cu fascicul in evantai.

Prelucrarea si analiza tomografiei se realizeaza cu soft-ul de vizualizare si editare Romexis Viewer 3D, cu ajutorul caruia se cumuleaza informatii numeroase si precise ale structurii dentare si elementelor anatomice invecinate (sinusuri maxilare, canal mandibular).

Cu acest soft se pot obtine:

- masuratori foarte precise (scala 1:1) ale osului sau ale diferitelor zone de interes (se pot masura atat distante, cat si unghiuri);

- sectiuni in orice directie sau in orice axa aleasa de medic (foarte util pentru masuratorile necesare implantologilor, vizualizarea ATM, endodontie);

- reprezentarea spatiala (reconstructia volumetrica) a zonei de interes;

- posibilitatea marcarii curburii arcadei investigate si crearea unei imagini pseudo-panoramice. Slice-urile vor fi, astfel, perpendiculare pe creasta osoasa marcata (foarte util pentru efectuarea unor masuratori cat mai exacte);

- determinarea densitatii osoase;

- editarea si modificarea imaginii din punct de vedere al contrastului, luminozitatii, marimii, etc;

- posibilitatea salvarii masuratorilor sau imaginilor de interes in format jpg sau pdf.

Pe langa softul Romexis Viewer oferit gratuit, cu care medicul poate usor explora si efectua analiza tomografiei, YTS - Dental View va ofera, la fiecare CT, analiza efectuata de catre echipa noastra de profesionisti.

Totul despre Setul ortodontic complet

Centrele YTS - Dental View, centre exclusive de radiologie și tomografie dentară, vă pun la dispoziție o gamă vastă de servicii destinate ortodonției.

Setul ortodontic complet cuprinde fotografii de diagnostic extra și intraorale și două radiografii extraorale (ortopantomograma în ocluzie și teleradiografia laterală). Cele două radiografii sunt efectuate cu aparatură Morita sau Planmeca de ultimă generație, a cărei doză de radiații este mult mai mică decât cea emisă de aparatura radiologică clasică.

Exemple ale celor două radiografii și ale fotografiilor de diagnostic

Fotografiile medicale de diagnostic ortodontic sunt realizate cu un aparat de fotografiat performant, la care este atașat un blitz special pentru fotografii medicale.

Pentru realizarea fotografiilor intraorale se utilizează depărtătoare speciale, pentru a facilita vizualizarea întregii danturi.

Atât depărtătoarele utilizate, cât și blitzul pot provoca un ușor disconfort. Cu cât pacientul este mai cooperant și urmează instrucțiunile operatorului, cu atât timpul de realizare a setului ortodontic este mai redus.

Pentru că însemnăm mai mult decât o simplă denumire!

Dr. Valentina Boantă, Director Executiv YTS-Dental View

Tomografii dentare in Centrele YTS - Dental View - calitate maxima, cu doze minime de radiatii

Centrele YTS-Dental View sunt utilate cu cele mai performante tomografe din Romania:

· Planmeca ProMax 3D MID in Centrul Piata Muncii
· Morita Veraviewepocs 3D in Centrul Aviatorilor
· Planmeca ProMax 3D in Centrul Lujerului

Aceste computere tomograf cu fascicul conic (CBCT-uri) va ofera:

· Cea mai mare rezolutie a imaginii
· Cea mai mica doza de radiatii
· Tomografii dentare cu volum pana la 200 x 170 cm
· Tomografii ORL (cai aeriene, sinusuri, urechi, nas, os temporal)
· Pro Face Sistem – reconstructia 3D a structurilor moi ale fetei
· Modul de endodontie cu sectiuni din 0,1 in 0,1 mm
· Modul de ortodontie cu analiza teleradiografiei
· Modul de implantologie cu simulare de implant si librarie de implanturi
· Soft Romexis Viewer actualizat cu culori diferite ale diametrelor osoase.

Va asteptam cu drag in oricare dintre Centrele noastre si va multumim ca aţi ales serviciile noastre!

Dr. Valentina Boantă, Director Executiv YTS-Dental View

Ce sunt radiaţiile?

Toate elementele din mediul înconjurător - alimentele, aerul, apa, solul, etc. - sunt alcătuite din microparticule numite "atomi". O parte din atomii existenţi în natură sunt instabili şi eliberează energie sub forma unor unde sau particule (tip alfa şi beta). Aceste unde sau particule sunt cunoscute drept "radiaţii".

Oamenii sunt expuşi radiaţiilor în permanenţă, fie că acestea provin de la surse naturale (radiaţii atmosferice sau terestre) sau de la surse artificiale (televizorul, monitorul computerului sau telefoanele mobile). Efectele lor asupra organismului uman sunt prea mici pentru a fi considerate periculoase. 

Cantitatea de radiaţii absorbită de o persoană se măsoară în Sievert (Sv).

Sievertul reprezintă doza de iradiere, evaluând cantitativ efectele bilogice ale radiaţiei.

Radiaţiile medicale:

Începând cu anii '50, radiaţia a fost folosită din ce în ce mai mult în diagnosticări şi tratamente medicale. Astfel, cu ajutorul tehnicii medicale nucleare, se afirmă sau se confirmă anual milioane de diagnostice: se localizează şi se descriu tumori, fracturi, afecţiuni dentare etc.

Ghidurile Europene pentru CBCT - partea I

RADIATION PROTECTION: CONE BEAM CT FOR DENTAL AND MAXILLOFACIAL RADIOLOGY
Evidence based guidelines , a report prepared by the SEDENTEXCT project 2011

www.sedentexct.eu

 

The SEDENTEXCT project (2008-2011) is supported by The Seventh Framework Programme of the European Atomic Energy Community (Euratom) for nuclear research and training activities (2007 to 2011) http://cordis.europa.eu/fp7/euratom/.

Neither the European Commission nor any person acting on behalf of the Commission is responsible for the use that might be made of the following information. The views expressed in this publication/document/guidelines are the sole responsibility of the author and do not necessarily reflect the views of the European Commission.

PREFACE 

SEDENTEXCT was a collaborative project that aimed to acquire key information necessary for sound and scientifically based clinical use of Cone Beam Computed Tomography (CBCT) in dental and maxillofacial imaging. In order that safety and efficacy are assured and enhanced in the “real world”, a parallel aim was to use this information to develop evidence-based guidelines dealing with justification, optimisation and referral criteria for users of dental CBCT. The aim of this document is to provide such evidence-based guidelines to professional groups involved with CBCT in dental and maxillofacial imaging, including:

• Dental and Maxillofacial Radiologists
• Dentists working in primary care and their assistants
• Radiographers/ Imaging technicians
• Medical Physicists
• Equipment manufacturers and suppliers

The core guidance in preparing the document has been from the two relevant Council Directives of the European Union:

• Directive 96/29/Euratom, of 13 May 1996, laying down the basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionising radiation (Basic Safety Standards Directive)

• Directive 97/43/Euratom, of 3 June 1997, on health protection of individuals against the dangers of ionising radiation in relation to medical exposure (Medical Exposures Directive).

Beyond these sources, the detailed guidelines have been prepared by systematic review of the currently available literature. No exposure to X-rays can be regarded as completely free of risk, so the use of dental CBCT by practitioners implies a responsibility to ensure appropriate protection. 

This document supersedes the Provisional Guideline document published in May 2009, incorporating new research, including work carried out within the SEDENTEXT project itself. 

Guidelines are not a rigid constraint on clinical practice. Local variations will be required according to national legislation, healthcare provision and practice and the unique clinical circumstances of patients.

I hope that the document will be of help to professional groups and contribute to optimizing the use of ionizing radiation in dental imaging. 

K. HORNER

SEDENTEXCT project Co-ordinator

Ghidurile Europene pentru CBCT - partea a II - a

2: RADIATION DOSE AND RISK

2.1: X-rays

X-rays are a type of electromagnetic (EM) radiation. EM radiation also includes visible light, radio waves, microwaves, cosmic radiation, and several other varieties of “rays”. All can be considered as “packets” of energy, called photons, which have wave properties, most importantly a wavelength and frequency. EM radiation can vary in wavelength from 10-13 to 103 m with X-rays having a small wavelength of 10-9 to 10-13m. The importance of this is that small wavelengths mean high energy, deeper penetration though matter and high energy transfer to the matter. When X-rays hit atoms this energy can be transferred, producing ionisation of atoms. Other examples of ionising radiation are alpha, beta and gamma radiation, which are mostly associated with the decay of radioactive materials. All ionising radiations have the capability cause harm to the organs and tissues of the body of exposed persons.

2.2: Radiation damage

When patients undergo X-ray examinations, millions of photons pass through their bodies. These can damage any molecule by ionisation, but damage to the DNA in the chromosomes is of particular importance. Most DNA damage is repaired immediately, but rarely a portion of a chromosome may be permanently altered (a mutation). This may lead ultimately to the formation of a tumour. The latent period between exposure to X-rays and the clinical diagnosis of a tumour may be many years. The risk of a tumour being produced by a particular X-ray dose can be estimated; therefore, knowledge of the doses received by radiological techniques is important. While doses and risks for dental radiology are small, a number of epidemiological studies have provided some limited evidence of an increased risk of brain (Longstreth et al, 1993; Preston-Martin & White, 1990), salivary gland (Preston-Martin & White, 1990; Horn-Ross et al, 1997) and thyroid (Hallquist et al, 1994; Wingren et al, 1997; Memon et al, 2010) tumours for dental radiography.

Ghidurile Europene pentru CBCT - partea a III - a

4: JUSTIFICATION AND REFERRAL CRITERIA

As with any X-ray exposure, CBCT entails a risk to the patient. It is essential that any X-ray examination should show a net potential benefit to the patient, weighing the total potential diagnostic benefits it produces against the individual detriment that the exposure might cause. The efficacy, benefits and risk of available alternative techniques having the same objective but involving less (or no) exposure to X-rays should be taken into account. A record of the justification process must be made in the patient‟s clinical records.

All CBCT examinations must be justified on an individual basis by demonstrating that the potential benefits to the patients outweigh the potential risks. CBCT examinations should potentially add new information to aid the patient‟s management. A record of the Justification process must be maintained for each patient ED BP

In order that the justification process can be carried out, it is essential that selection of dental CBCT is based on the individual patient‟s history and a clinical examination. The “routine” use of dental CBCT on patients based on a generalised approach rather than individual prescription is unacceptable. A “routine” (or “screening”) examination is defined as one in which a radiograph is taken regardless of the presence or absence of clinical signs and symptoms.

Ghidurile Europene pentru CBCT - partea a IV - a

4.4 Surgical applications

Surgery of the dental and maxillofacial region encompasses minor procedures (oral surgery) that may be performed in dental practices and major surgery (maxillofacial surgery) that would always be carried out by specialists, often in a hospital environment.

4.4.1 Exodontia 

There is no literature related to the use of CBCT as part of the pre-extraction assessment of erupted teeth and there seems no good reason to suggest its use for this purpose. The literature concentrates on unerupted teeth, principally lower third molars, as demonstrated in the systematic review performed by Guerrero et al (2011).

Ghidurile Europene pentru CBCT - partea a V - a

5:     CBCT EQUIPMENT FACTORS IN THE REDUCTION OF RADIATION RISK

        TO PATIENTS

The literature review in section 2.5 showed that the effective dose may vary significantly between different CBCT equipment. In this section, the significance of selection of appropriate exposure settings in limiting doses while maintaining the image quality at acceptable clinical levels (optimisation) is reviewed. Due account was given to any available national recommendations on CBCT optimisation (Haute Autorité de Santé, 2009; Health Protection Agency, 2010; Statens strålevern, 2010).

5.1: X-ray tube voltage and mAs

The kilovoltage (kVp) of an X-ray tube is the potential difference between anode and cathode during operation. The tube voltage determines the energy of the X-rays. Lower tube voltages give lower energy X-rays and thus increase the dose to the skin of the patient (Horner 1994). Increasing the kVp may result in a decrease in skin and effective dose (Geijer et al 2009) but an increase in scatter. Higher kVp, however, reduces the beam hardening effect (Ludlow 2011). More research is needed to explore the optimisation of kVp in CBCT. The product of the tube current measured in milliamperes (mA) and the exposure time measured in seconds (s) only affects the number of photons emitted by the X-ray tube and not their energy. Increased mAs increases dose, but the beam penetration and image contrast remain the same. The kVp and mA in dental CBCT equipment is either fixed or can be varied depending on the CBCT unit (Ludlow et al 2006; Lofthag-Hansen et al 2008; Silva et al 2008; Okano et al 2009; Roberts et al 2009). Fixed kVp and mA preclude optimisation.

Ghidurile Europene pentru CBCT - partea a VI - a

6.4.2 Reject analysis 

A simple and valuable tool in clinical image QC is reject analysis. Over a specified time period, a record is kept of radiological examinations that are rejected and that require repeats to be performed, with the date and the reason for the rejection (e.g. area of interest not imaged, image blurred etc.) and the cause if known (e.g. incorrect positioning, patient movement etc.). This allows the calculation of the proportion of examinations which are rejected over a specified period and the identification of the most frequent causes of rejection. Reject analysis can be carried out prospectively (as images are performed) and/or retrospectively. When performed retrospectively, this procedure is a form of Clinical Audit, which requires assessment against a clearly defined set of Quality Standards. Table 6.1 provides a means of comparing CBCT examinations against a standard.

Ghidurile Europene pentru CBCT - partea a VII - a

APPENDIX 1 SUMMARY OF RECOMMENDATIONS

The core recommendations and statements in this document are the “Basic Principles”, described in section 3.3. Below are listed the other specific guidelines, taken from the relevant sections, with their evidence grading:

Introduction and Guideline development

1.1: These Guidelines should be reviewed and renewed using an evidence-based methodology after a period no greater than five years after publication.

Lansare Blog YTS - Dental View

Calitate, Claritate, Profesionalism, Încredere, Grijă, Zâmbete fericite - acestea sunt cuvintele care ne definesc!

Cea mai performantă aparatură radiologică, investigaţii radiologice digitale la cea mai înaltă rezoluţie şi calitate, radiografii şi tomografii dentare obţinute cu cele mai mici doze de radiaţii, grija pentru pacienţii noştri şi profesionalismul personalului nostru ne fac prima alegere a medicilor şi clinicilor stomatologice din Bucureşti!

Preocuparea noastră principală este PACIENTUL, fapt ce se poate distinge şi din motto-ul companiei "Priveşte-ţi pacienţii mai clar", care exprimă calitatea şi claritatea serviciilor oferite, dar şi aportul pe care îl aducem medicilor în obţinerea unor zâmbete luminioase, pentru fiecare pacient.

YTS - Dental View este cea mai modernă reţea exclusivă de centre de radiologie şi tomografie dentară din Bucureşti, având servicii şi echipamente ce răspund celor mai înalte standarde europene. Pe lângă aparatura ultramodernă de care dispune, YTS - Dental View lucrează o echipă de profesionişti, orientată spre confortul pacienţilor.